| Author |
 Topic  |
|
|
Miksteele
Hurricane-Extreme User
USA
216 Posts |
 Posted - February 08 2005 : 11:19:39 AM
|
Wonderful tool!  I have a question...
If I want to number my files using the "RENUMBERer" is there a way to number them in the front of the filename? I can't seem to combine my efforts to do this either...  |
Mike Fischer
Fischer Design Group, LLC
Building Model Coordination - Steel Detailing - Connection Design
www.FischerDesignGroup.com |
|
|
Admin
Administrator
652 Posts |
Posted - February 08 2005 : 8:14:50 PM
|
Hi Miksteele,
As of now, no there isn't a way to do this.
However, if you can give me an example of what you might need (I don't ever do this (at the start), so I'm not sure what the numbering conventions are for numbering at the start of the filename) I sure can work on it...
Thanks,
Bill |
Hurricane for AutoCAD
http://www.74mph.com
FAQ at
http://www.74mph.com/faq/faq.html
Tutorials at
http://www.74mph.com/tutorials.html |
 |
|
|
Miksteele
Hurricane-Extreme User
USA
216 Posts |
Posted - February 08 2005 : 9:41:58 PM
|
I was just thinking the same thing as the RENUMBERer, but the front.... like:
s102
a340
s305
would become:
01s102
02a340
03s305
What you have is RENUMBER the end with the 3 options: starting at, step and pad.
A RENUMBER the front with the same 3 options: starting at, step and pad would do it!
Seems to make sense to have this in the same tab, possibly a radio button for the FRONT or END along with the APPEND and OVERWRITE.
Just throwing it out there...  I had a need for this one today.
|
Mike Fischer
Fischer Design Group, LLC
Building Model Coordination - Steel Detailing - Connection Design
www.FischerDesignGroup.com |
|
|
| |
Topic |
|
File Renamer
