| Author |
 Topic  |
|
|
n/a
deleted
1 Posts |
 Posted - December 29 2003 : 7:23:26 PM
|
| I must be blind. Where is this check box. |
Jerry Logan
Valley CAD Consulting
Boise, Idaho 83712
jaycorp@mindspring.om |
|
|
Miksteele
Hurricane-Extreme User
USA
216 Posts |
Posted - December 29 2003 : 10:38:08 PM
|
Bill is the expert here, but I believe...for logical reasons, the "NO SAVE" was replaced by "ABORT".
At one time the "ABORT" actually was a "DELAY / NO SAVE". Now the "DELAY" is separate from the "ABORT". |
Mike Fischer
Fischer Design Group, LLC
Building Model Coordination - Steel Detailing - Connection Design
www.FischerDesignGroup.com |
 |
|
|
Admin
Administrator
652 Posts |
Posted - January 06 2004 : 8:18:02 PM
|
Yes, because of the addition of the "test for altered db" type open command (which has totally removed the dreaded "your drawing has been changed, are you sure you want to discard changes..." prompt, the "NO QSAVE" box became redundant.
The DELAY checkbox is now it's own entity, and is not part of the removed "Trial Run" box (which was replaced with the Abort)
(I just checked the FAQ, and corrected it, I am assuming that this is where your question came from)
Regards,
Bill |
Hurricane for AutoCAD
http://www.74mph.com
FAQ at
http://www.74mph.com/faq/faq.html
Tutorials at
http://www.74mph.com/tutorials.html |
|
|
| |
Topic |
|
|
|
no save check box?
