The Hurricane Forum - batch move

The Hurricane Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

Hurricane for AutoCAD

Tips and Tricks

batch move

New Topic

Reply to Topic

Printer Friendly

Author

Topic

mau
Starting Member

3 Posts

Posted - June 14 2007 : 5:32:14 PM

hi, everyone.

i am having a strange issue in what might be a very common use for hurricane.

i want to batch move several objects by @0.5,0,0 (X axis, that is) but when i check the drawings, they move along the Y axis.

any suggestions please? i have checked my world UCS in every drawing. what else could i be doing wrong? i'll paste the script i am using in a few minutes.

Admin
Administrator

652 Posts

Posted - June 25 2007 : 07:35:02 AM

Hi Mau,

Seeing as there hasn't been a response yet, could you please provide the script you are attempting to run. Maybe that will shed some light on what is going on.

Thanks,
Bill

Hurricane for AutoCAD
http://www.74mph.com
FAQ at
http://www.74mph.com/faq/faq.html
Tutorials at
http://www.74mph.com/tutorials.html

mbicm
New Member

13 Posts

Posted - June 25 2007 : 12:27:40 PM

have you made sure your UCS is in world?

mau
Starting Member

3 Posts

Posted - June 27 2007 : 11:30:17 AM

hi mbicm, yeah mate. i am in UCS in world. checked it every time i ran Hurricane.

i lost the script. i will make some other tests 2day and if i get same erroneus results i will post the script right away.

thanx to those who have replied.

mau
Starting Member

3 Posts

Posted - June 27 2007 : 12:10:51 PM

guys, the trick that solved it was to deliberately set UCS world at the beginning of the script, regardless i knew it was already set on "world".

now all is working perfectly.

=)

thanx again!

Topic

New Topic

Reply to Topic

Printer Friendly

The Hurricane Forum

This page was generated in 0.33 seconds.

Snitz Forums 2000