| T O P I C R E V I E W |
| GregD |
Posted - November 29 2007 : 6:41:35 PM
I have a series of drawings that show 6 sections across an architectural background. This was managed by the architect by simply adding a layout tab for each section. Each drawing can have as many as six layout tabs.
Each tab has a title block with different attributes. I'd like cause an update across all tabls of a series of drawings.
Also, I need to add a new block to each title block.
Is there a way for me to pick up the tabs across a series of drawings?
Thx,
GeeDee |
| 1 L A T E S T R E P L I E S (Newest First) |
| Admin |
Posted - November 30 2007 : 7:26:03 PM
Hi GregD,
The simple answer is, there is not simple answer!
Basically, you are confined to what AutoCAD has to offer at the command-line.
So, if you use the -LAYOUT command, and get things working at the command line
using that command, (along with others), you will just have to reproduce them in
a script.
There are a couple of ways to "cycle" through the layout tabs.
Here are a couple threads to start you off..
http://www.74mph.com/forum/topic.asp?TOPIC_ID=269&SearchTerms=layout
http://www.74mph.com/forum/topic.asp?TOPIC_ID=117&SearchTerms=layout
Please let me know how it goes!
Regards,
Bill |
|
|
