; ***************************************************************
;  HURRICANE 6.5.5 - SCRIPT CREATED 2006-06-14 : 2:59:57 PM
; ***************************************************************
; << START OF PRE-BATCH COMMANDS >>
_SDI 1
; << END OF PRE-BATCH COMMANDS >>
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p457.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 1 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p458.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 2 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p459.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 3 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p460.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 4 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p461.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 5 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p462.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 6 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p463.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 7 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p464.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 8 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p465.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 9 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p466.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 10 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p467.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 11 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p468.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 12 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p469.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 13 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p470.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 14 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p471.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 15 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p472.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 16 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p475.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 17 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p476.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 18 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p477.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 19 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p478.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 20 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p479.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 21 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p480.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 22 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p484.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 23 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p485.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 24 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p493.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 25 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p495.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 26 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p500.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 27 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p503.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 28 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p9.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 29 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a100.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 30 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a106.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 31 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a107.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 32 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a108.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 33 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a109.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 34 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a114.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 35 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a130.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 36 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a133.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 37 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a134.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 38 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a139.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 39 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a142.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 40 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a144.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 41 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a151.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 42 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a153.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 43 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a220.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 44 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a292.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 45 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a295.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 46 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a297.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 47 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a299.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 48 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a301.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 49 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a302.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 50 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a303.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 51 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a305.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 52 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a307.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 53 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a309.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 54 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a311.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 55 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a312.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 56 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a314.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 57 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a320.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 58 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a322.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 59 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a324.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 60 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a325.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 61 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a329.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 62 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a350.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 63 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a352.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 64 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a353.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 65 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a359.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 66 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a364.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 67 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a378.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 68 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a392.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 69 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a393.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 70 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a394.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 71 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a395.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 72 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a396.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 73 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a397.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 74 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a398.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 75 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a399.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 76 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a400.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 77 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a401.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 78 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a402.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 79 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a403.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 80 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a404.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 81 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a405.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 82 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a406.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 83 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a407.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 84 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a408.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 85 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a410.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 86 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a411.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 87 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a412.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 88 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a413.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 89 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a414.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 90 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a415.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 91 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a416.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 92 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a417.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 93 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a418.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 94 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a419.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 95 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a420.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 96 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a421.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 97 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a422.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 98 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a423.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 99 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a424.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 100 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a425.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 101 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a426.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 102 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a427.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 103 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a428.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 104 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a429.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 105 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a430.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 106 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a431.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 107 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a432.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 108 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a433.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 109 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a434.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 110 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a435.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 111 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a436.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 112 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a437.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 113 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a441.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 114 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a442.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 115 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a444.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 116 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a445.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 117 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a446.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 118 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a447.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 119 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a449.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 120 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a450.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 121 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a453.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 122 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a454.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 123 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a455.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 124 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a456.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 125 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a457.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 126 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a459.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 127 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a462.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 128 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a463.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 129 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a469.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 130 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a472.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 131 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a491.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 132 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a502.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 133 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a509.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 134 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a511.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 135 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\a521.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 136 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\b25.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 137 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\m26.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 138 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p104.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 139 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p114.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 140 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p115.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 141 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p121.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 142 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p122.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 143 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p128.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 144 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p129.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 145 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p130.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 146 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p131.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 147 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p133.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 148 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p135.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 149 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p136.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 150 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p137.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 151 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p139.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 152 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p140.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 153 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p141.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 154 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p142.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 155 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p143.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 156 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p144.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 157 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p171.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 158 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p2.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 159 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p266.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 160 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p267.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 161 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p268.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 162 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p271.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 163 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p273.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 164 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p274.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 165 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p275.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 166 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p308.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 167 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p309.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 168 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p311.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 169 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p312.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 170 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p313.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 171 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p314.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 172 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p315.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 173 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p316.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 174 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p317.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 175 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p318.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 176 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p319.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 177 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p320.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 178 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p324.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 179 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p325.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 180 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p326.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 181 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p332.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 182 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p333.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 183 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p334.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 184 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p336.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 185 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p337.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 186 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p339.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 187 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p340.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 188 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p341.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 189 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p346.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 190 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p348.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 191 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p355.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 192 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p356.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 193 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p359.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 194 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p363.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 195 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p365.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 196 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p367.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 197 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p370.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 198 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p371.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 199 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p374.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 200 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p377.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 201 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p378.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 202 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p379.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 203 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p380.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 204 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p381.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 205 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p383.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 206 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p387.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 207 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p391.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 208 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p392.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 209 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p394.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 210 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p395.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 211 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p396.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 212 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p397.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 213 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p398.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 214 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p399.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 215 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p4.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 216 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p400.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 217 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p401.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 218 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p402.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 219 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p404.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 220 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p405.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 221 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p407.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 222 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p408.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 223 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p409.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 224 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p410.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 225 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p411.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 226 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p412.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 227 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p415.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 228 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p416.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 229 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p418.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 230 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p419.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 231 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p420.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 232 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p421.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 233 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p422.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 234 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p423.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 235 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p424.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 236 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p425.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 237 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p426.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 238 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p427.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 239 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p428.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 240 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p429.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 241 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p430.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 242 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p431.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 243 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p432.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 244 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p433.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 245 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p434.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 246 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p435.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 247 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p437.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 248 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p439.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 249 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p440.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 250 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p441.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 251 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p442.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 252 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p443.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 253 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p444.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 254 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p445.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 255 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p446.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 256 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p447.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 257 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p448.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 258 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p450.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 259 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p451.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 260 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p452.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 261 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p453.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 262 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p455.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 263 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
(if (/= (getvar "DBMOD") 0)(command "_.OPEN" "_Y")(command "_.OPEN"))
"E:\F5-265\p456.dxf"
; << START OF PRE-USERSCRIPT COMMANDS >>
(SETVAR "MODEMACRO" "Drawing 264 of 264")
ZOOM E
; << START OF USER SCRIPT >>
(load "kcpart")
kcpart
_QSAVE
_SDI 0
_EXPERT 0
_FILEDIA 1